ProfitUI Reborn [Help & Feedback] - Page 16

labrat · #**376** 05-01-2006, 03:54 PM

thank you kindly gm9

mysteroe · #**377** 05-01-2006, 06:51 PM

Thank you

This has taken me to a default and all the proper things are in there place.

Mystero

darthanos · #**378** 05-01-2006, 08:08 PM

Has anyone seen/experienced a problem opening up the U Guild Recruiting listing window?

RainQueen96 · #**379** 05-02-2006, 02:32 AM

I've just eagerly downloaded 2.4 to try it out, but despite downloading the fix to the maintained window, I'm still unable to right click on it. I double checked, downloaded the fix file again and deleted the one in my UI folder first just to be absolutely sure I had replaced it, but still no joy.

It's not a major issue as I can cancel buffs via the effects window and I'm happy with the placing of it, but it would be nice if anyone else could confirm they're either having the same issue or have been able to get it working properly.

Otherwise great job as usual.

EDIT: Don't know if it's just me and something weird is going on, but I've noticed that since upgrading to 2.4 I'm also unable to right click the player window.

**gm9** · #**380** 05-02-2006, 03:34 AM

*awards himself the Medal for Stupidity*

RainQueen96, you are absolutely right. Still half asleep before going off to work, I uploaded the same bugged version of the maintained window again.

You're also correct with respect to the player window. Guess I earned my award.

A corrected hotfix covering both windows is available on the main thread.

juStanDi · #**381** 05-02-2006, 03:38 AM

I´m not able to stop spells in my spelllist (left) on my screen.

it is difficult to stop buffs, before using 2.4 i can rightclick and stop the spells, buffs etc

**gm9** · #**382** 05-02-2006, 03:39 AM

*points to his post above*

**gm9** · #**383** 05-02-2006, 04:07 AM

I have seen yesterday when installing the UI on another computer that the fonts looked different than on my computer, like a narrow version of the font. On the startbutton I saw that the percentages were cut off at the right.

Screenshot from my computer using 1280*1024, smooth fonts enabled, small fonts disabled, Nvidia graphics card is below. This is how it should look like.

The computer were it didn't look right was 1280*960, same font settings, but had an ATI card. I don't have a screenshot right now.
EDIT: Screenshot now added.

Could I please have feedback on whether anyone has issues with the text being placed/displayed incorrectly on the startbutton (or other windows)? I know that setting both smooth fonts + small fonts doesn't work (unfortunately Droiyan7's fix didn't work for me), but this is not the issue here.

lollygagger · #**384** 05-02-2006, 06:38 AM

Got sick of looking at the default breath progress bar so I put together a Profit styled one.

//lollygagger

juStanDi · #**385** 05-02-2006, 06:52 AM

i have no master, combat, music selection.
i´ve removed each files before installing 2.4.

**gm9** · #**386** 05-02-2006, 08:16 AM

lollygagger, what are you doing underwater all the time that you got sick of looking at the breath bar?

Just kidding. Thanks for contributing, I'm looking forward to check it out.

juStanDi, I quote from the changelog:

Quote:

+ added expandable sliders for setting sound & music levels. If you don't use one of the included uisettings files, you'll need to unlock and then resize your startbutton window upwards to be able to see the the sliders. If you're done, lock again and enable clickthrough.

aigor · #**387** 05-02-2006, 08:29 AM

Good work man!!! When i'll be at home i'll DL and i hope that it will works everything
I'm so happy that u put a Geniva maintened slim ( it works very well i use from 1.8).
I want to suggest another little help, if to someone doesn't like the HO window,i use that file http://www.eq2interface.com/download...fo.php?id=3306 it's the HO window like default but a little smaller ( it works very well i use from 1.8).

enjoy^^

juStanDi · #**388** 05-02-2006, 01:21 PM

Quote:

Originally Posted by gm9

lollygagger, what are you doing underwater all the time that you got sick of looking at the breath bar?

Just kidding. Thanks for contributing, I'm looking forward to check it out.

juStanDi, I quote from the changelog:

Thx it work

Droiyan7 · #**389** 05-02-2006, 07:13 PM

_market_favorites1.xml
Add 'Spongy Loam' to market search preset

eq2ui_mainhud_mainchat.xml
Del sneaking socials button, why it still here and sneaking?

Dekeon · #**390** 05-02-2006, 07:51 PM

Sorry to bug. Love the UI btw but how could you just set up only the cure hot keys and sorry if it has allready been posted 16 time.

**gm9** · #**391** 05-03-2006, 01:30 AM

Droiyan7, you found the secret button! :It's a new concept: Invisible buttons take up less screen space.

In fact I just forgot to completely remove it for 2.3 and forgot to the correct file in 2.4. But thanks. Also for finding a missing entry in the favorites.

Dekeon, not sure what you're asking, but you cannot just take the cure hotkeys, since they are no separate window.

Droiyan7 · #**392** 05-03-2006, 02:25 AM

M...

Graig Warder's experience works incorrectly for me.
Maybe some modify for Korean setting affect it.
(In fact, some setting for Korean cause a little bit alignment problem)

But nevermind, I can use my own fix.

By the way, using /loadui cause EQII crush, but I remember it worked fine with v2.0, and works fine with Default UI. Does anyone have idea for fix it?

**gm9** · #**393** 05-03-2006, 04:21 AM

Like a said a few posts above, there appear to be alignment differences between different installations. At least in my case it was not related to a language difference, since both installations were of the same language. I think it's either a resolution or a graphics card/driver issue. I'll try to find out. Also, as I wrote in the update notes, the fix you proposed for smooth and small fonts didn't work for me. Does it really work for you with both options enabled or disabled? If so, maybe you could post your modded file.

With respect to the /loadui command, it works about 30% of the time for me. I can load the default UI most of the time, but going back to ProfitUI (or another custom UI) likely crashes the client. That command has always been buggy though. SOE is aware of it and hopefully working on it, see this thread. However, it would be really helpful if we could link the crash to something specific with the interface. I don't remember whether ProfitUI 2.0 worked flawlessly, but if it did, we might substitute it's files with the current files until it starts crashing. We'd know where to look then. I hope I make sense.

Tokamak · #**394** 05-03-2006, 08:24 AM

Hello hello

Just wondering - the bar at the bottom detailing resists / avoidance etc - which file do I delete from the profitui folder to get rid of it? Im just looking to get rid of a bit of clutter

Many many thanks for gm9 et al for continuing with this ui - If appropriate I'll post an .ini file for my prefered raiding set up when I get the boxes where I want them

Cheers - Toka

Edit - no matter, had a play around and got rid of it.

**gm9** · #**395** 05-03-2006, 10:38 AM

Quote:

Originally Posted by Tokamak

If appropriate I'll post an .ini file for my prefered raiding set up when I get the boxes where I want them

Of course, I'm sure people would appreciate it. Make sure to include a screenshot and let us know the resolution you used.

Since Spiricore is MIA I'll start a new main thread soon anyway and I could include a section for alternate setups like yours.

runamonk · #**396** 05-03-2006, 11:05 AM

Quote:

Originally Posted by gm9

I have seen yesterday when installing the UI on another computer that the fonts looked different than on my computer, like a narrow version of the font. On the startbutton I saw that the percentages were cut off at the right.

Screenshot from my computer using 1280*1024, smooth fonts enabled, small fonts disabled, Nvidia graphics card is below. This is how it should look like.

The computer were it didn't look right was 1280*960, same font settings, but had an ATI card. I don't have a screenshot right now.

Could I please have feedback on whether anyone has issues with the text being placed/displayed incorrectly on the startbutton (or other windows)? I know that setting both smooth fonts + small fonts doesn't work (unfortunately Droiyan7's fix didn't work for me), but this is not the issue here.

Confirmed, I have the same issue.

NVidia 7800GT, 1280x1024

badviper · #**397** 05-03-2006, 11:44 AM

hello m8 i do love this ui been useing when it was 18

got the new one now LOVEING IT --but where's the open all bags button! gone

plzz plzz keep up the good work u is doing on this the best UI 4 eq2

cheers )

hiroprotagonist · #**398** 05-03-2006, 12:12 PM

Since they defaulted open all bags to your keyboard B button, I believe they said they took it off to save the space.

Droiyan7 · #**399** 05-03-2006, 11:16 PM

Quote:

Originally Posted by gm9

Like a said a few posts above, there appear to be alignment differences between different installations. At least in my case it was not related to a language difference, since both installations were of the same language. I think it's either a resolution or a graphics card/driver issue. I'll try to find out. Also, as I wrote in the update notes, the fix you proposed for smooth and small fonts didn't work for me. Does it really work for you with both options enabled or disabled? If so, maybe you could post your modded file.

I use Sapphire Radeon X800GTO2(disguised to X850XT PE via bios trick)
Resolution : 1280*1024(Full screen mode), 1280*1002(Window mode)

My screens
eq2_000000.png and eq2_000001.png with my own fix
eq2_000002.png and eq2_000003.png with Graig Warder's fix

My files( IspinSharle.zip )
_Profit_Styles.xml : I use 'IspinSharle' folder instead 'ProfitUI' folder
eq2ui_mainhud_experience.xml : I think I don't mod it anything. Just same as yours.

In addition, Korean use 'cl_language Japanese' include 'eq2.ini' ('cl_language Korean' doesn't work since EQII east was closed)

By the way, LU #23 has been pushed to the live servers and eq2ui_journals_quest.xml is changed('The group tab on the quest journal should now properly display all the quests your group members possess.')

**gm9** · #**400** 05-04-2006, 03:55 AM

Thx for the feedback runamonk and Droiyan7. These fonts and alignment issues are really strange. I *think* Graig Warder's fix was only for having Smooth and Small fonts at the same time, at least it correctly aligned those on my system (but showing the standard fonts, not the custom ProfitUI fonts - another enigma. Maybe moving the fonts from _profit_styles.xml to eq2ui_fonts.xml might help, I never tried that so far...).

I'll try out your file for the alignment problem. Do you also have the issue with the startbutton percentage numbers being cut off at the right (see my post above)?

EDIT: And thanks for the heads up on the LU23 changes. I'm on Runnyeye (EU server), we'll only get the patch tomorrow or in a few days.