eXtremeUI v2

[Gravdigr]

Originally Posted by Landiin

Hmm they must not be auto sizing now or hmm. I'll look into it. You can always pres esc to stop the current spell or jump.

This has been an issue for me since day 1. Before it wasn't too big a deal but now as a defiler I have 10 maintaqined spells up before I cast any wards or debuffs. This is greatly affecting my play as I do not know right away when my ward drops if I have debuffs up on the mob. Could it be tied to the resolution? I'm running in 1280x1024.

[tobann]

I downloaded the file last night. I ran it and it made an extreme file in the UI section of EQ2. It asked to make Extreme the default UI and I said yes,but when I logged in to EQ2 it was the same old SOE UI.Am I missing something,or is there another step I need to take?
THanks Tobann

[Landiin]

Originally Posted by tobann

I downloaded the file last night. I ran it and it made an extreme file in the UI section of EQ2. It asked to make Extreme the default UI and I said yes,but when I logged in to EQ2 it was the same old SOE UI.Am I missing something,or is there another step I need to take?
THanks Tobann

You must not have a U.S. install of eq. You need to install into your LP_REGION_??_?? direcotry not the EverQuest II direcotry as stated on the down load page.

If you did do a english US install then look in your eq2.ini file it should be pointing to eXtreme.

[tobann]

thanks for the reply. It is a US install and I looked in the eq2ini file,it is indicating extreme,but when I log in its the old UI
Tobann

[Landiin]

Originally Posted by tobann

thanks for the reply. It is a US install and I looked in the eq2ini file,it is indicating extreme,but when I log in its the old UI
Tobann

Very interesting in deed! By chance do you have an LP_REGION_??_?? directory in the base EverQuest II directory?

[Landiin]

UPDATE 3.21.0

Should be being piped to you via the AUCP

[BornAgainst]

Hi Landiin

i did seen some update but my sp still say v 3.20.2
its that how need to be or my cp not updates ?

[mclir]

Target window works until I send in my pet for attack. The target then becomes my pet and I can't switch it. Is there a fix for this?? Thanks.

[tobann]

Ill check tonight when I get home,though I dont remember seeing it,and I looked after your first responce. Ill post the results later tonight. Thnaks.
Tobann

[Landiin]

Originally Posted by mclir

Target window works until I send in my pet for attack. The target then becomes my pet and I can't switch it. Is there a fix for this?? Thanks.

Sorry that has nothing to do with the ui, that is game related.

[Landiin]

Originally Posted by BornAgainst

Hi Landiin

i did seen some update but my sp still say v 3.20.2
its that how need to be or my cp not updates ?

You prob got the update before I changed the vertion number in eq2ui_skininfo.xml is all. Update number don't realy mean any thing any more as you'll get the update as soon as I do them. I'll only change update numbers with each LU now and I may or may not remember to change the version number in the ui itself.

[Gravdigr]

Originally Posted by Gravdigr

This has been an issue for me since day 1. Before it wasn't too big a deal but now as a defiler I have 10 maintaqined spells up before I cast any wards or debuffs. This is greatly affecting my play as I do not know right away when my ward drops if I have debuffs up on the mob. Could it be tied to the resolution? I'm running in 1280x1024.

Is there any kind of fix or work around for this? I really don't want to use the default ui maintained window but if there is no fix I'm gonna have to =o(

[tobann]

Originally Posted by Landiin

Very interesting in deed! By chance do you have an LP_REGION_??_?? directory in the base EverQuest II directory?

I have a file LP_rgn and in there it says LP_region_En_US if that helps.

Tobann

[tobann]

In addition when I tried to close the updater I got an error message saying " access violation at address 0040391C in module eXtreme UI_CP.exe read of address FFFFFFFC"
Tried to redownlad it and got the same error message.
Tobann

[BornAgainst]

Originally Posted by tobann

In addition when I tried to close the updater I got an error message saying " access violation at address 0040391C in module eXtreme UI_CP.exe read of address FFFFFFFC"
Tried to redownlad it and got the same error message.
Tobann

just redownload installer and update your cp with that ( u dont have uninstall older version)
it will fix that problem for you

[sammeria]

Landiin,

Thanks for fixing the problem with the buff window icon minimizing.

[HucksFancy]

NM about the workarounds; I figured out how to turn off the eXTreme Pet Bar and use the default; but would be great if you got around to fixing the eXTreme one. Thanks.

_____________________________

I mentioned the other day that I am unable to get several of the Pet buttons working on the pet bar, but didn't get a response. I see several others have reported problems with the pet bar, but it also looks like some have gotten it working, so I'm wondering if there's something I need to change or set up.

The bar/window is not overlapping any other windows that I can see; I can move it around at will, but certain buttons just won't activate. It cannot be resized, either, though I'm uncertain whether this is intentional or not.

At least, if there is no other solution, can someone advise how to add the Pet Attack button to the macro bars? (I did this on my main character before installing eXTremeUI, so I've worked around it there by just using the macro bar Pet Attack button...but I have a new Alt and I don't know how to access the PetAttack button without uninstalling eXTremeUI, moving the button to the Macro bar, then reinstalling eXTremeUI again).

Alternatively, is it possible to turn off the UI for certain characters, via the eXTreme Control Panel?

Thanks, hope someone has some advice.

[Landiin]

HucksFancy,

I'll look at the pet window and see whats going on, last I loaded up a pet class all the buttons where working but it has been a bit.

[Landiin]

woohoo got my internet connection working again.. I was out all weeking, hmm but I did get a lot of work done awround the house that needed to be done lol.

[BornAgainst]

welcome back Landiin

[Fizzure]

I've tried installed, uninstalling, reinstalling eXtremeUI about 10 times and I have yet been able to get it to work properly. Here's what it looks like



I'm really interested in using this UI; however, like I said before, I've had problems everytime I try installing it.

Thanks

[Giancana]

Hucks if you are not a pet class charicter then fun spell pets ect only have a protect themselves tab and a follow tab, u cannot send them in for the attack, if you are a pet class then right click pet window and turn on frames and titlebars, that will bring ur pet commands back up.. Hope this helps

[Landiin]

Originally Posted by Fizzure

I've tried installed, uninstalling, reinstalling eXtremeUI about 10 times and I have yet been able to get it to work properly. Here's what it looks like



I'm really interested in using this UI; however, like I said before, I've had problems everytime I try installing it.

Thanks

Looks like you are missing or have a bad background.dds file in your extreme\images dir.

[sammeria]

I found a couple mods that would be great if they were implemented into ExtremeUI.

Pooka set price presets

Toggle Vault Button on Store Window

[Landiin]

Originally Posted by sammeria

I found a couple mods that would be great if they were implemented into ExtremeUI.

Pooka set price presets

Toggle Vault Button on Store Window

Well sammeria, I'll just have to see what I can do