tell you what, i was feeling nice
so i made it so you could do this, here is what you need to do.
1. Re-Download and install the updater
2. open the eq2map_config.cfg which is inside the directory you installed the updater. the default is C:\Program Files\EQ2MAP Updater
3. add the following 4 lines
Code:
<ConfigValues>
<OptionName>CommandLineArgs</OptionName>
<OptionValue>/env:ukmain /lang:en_GB</OptionValue>
</ConfigValues>
so it will then the whole file should look something like
Code:
<?xml version="1.0" standalone="yes"?>
<ConfigOpt>
<ConfigValues>
<OptionName>AutoUpdate</OptionName>
<OptionValue>True</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>AutoLaunch</OptionName>
<OptionValue>False</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>AutoLaunch2</OptionName>
<OptionValue>False</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>IconType</OptionName>
<OptionValue>0</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>IconSize</OptionName>
<OptionValue>1</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>MainhudOver</OptionName>
<OptionValue>False</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>StyleOver</OptionName>
<OptionValue>False</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>POIOver</OptionName>
<OptionValue>False</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>LogUpdates</OptionName>
<OptionValue>False</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>EQ2Dir</OptionName>
<OptionValue>D:\Program Files\Sony\EverQuest II</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>Language</OptionName>
<OptionValue>Default</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>AutoLaunchPath</OptionName>
<OptionValue>D:\Program Files\Sony\EverQuest II</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>AutoLaunchFile</OptionName>
<OptionValue>EQ2.exe</OptionValue>
</ConfigValues>
<ConfigValues>
<OptionName>AutoLaunchPath2</OptionName>
<OptionValue />
</ConfigValues>
<ConfigValues>
<OptionName>AutoLaunchFile2</OptionName>
<OptionValue />
</ConfigValues>
<ConfigValues>
<OptionName>CommandLineArgs</OptionName>
<OptionValue>/env:ukmain /lang:en_GB</OptionValue>
</ConfigValues>
</ConfigOpt>
the only important part to notice is where i put the 4 lines.
PLEASE let me know if this works for you. thanks.