Fetish Nightfall Full Release - Page 7

Spydie · #1 07-14-2005, 03:46 PM

I love this UI, but one problem I have since last update to 4.3

whenever I zone 1 out of 3 times I WILL zone back to chacacter select.

I've used the original UI and nothing like this happens.

What's up? what file is doin this crap to me?

Ancient1 · #2 07-15-2005, 12:15 PM

Zonx,

Thanks for pointing out how easy it is to duplicate one users setup to another.

I copied a lower level alt ini file to my main and guess what? I can actually size and move the raid window on all 4 sides now. I can make the raid window horizontal or vertical, or even stack them to make a 2X2 square. I thought I would mention that since you said they could only stack one way.

The only thing I can say is that I was using another UI before switching over to Fetish.

Thanks for all your hard work on a great UI.

Chumba · #3 07-17-2005, 02:42 PM

Zonx,

I am having a problem with my zone slection window when entering instanced zones - like Splitpaw Harclave (ther are 3, low med hard, and All I ever see is "Sundered Splitpaw: Trial [cut off there]" instead of the whole .....Trial of Harclave (yadda).

This "selection" window cuts everything off way short, and its not resizable ... the corners and sides bring up no "sizer" cursor, and moving the cursor with button-down only drags the window. I cannot even bring up the "properties" window for this interface piece. Since I can move it, its not locked.

Also, I am having a lot of problems with EQ2 Map not bringing up the right map - and in many cases, its not even listed in the pulldown, although the caption (top of the window) lists the correct zone [cut off because its too long to fit after the tabs) and brings up the right map but the wrong zone's icons (I tend to get things like Nek Castle icons on the Cove map). Reset (lower left corner) just reloads the wrong icons. Whats the most frustrating is that sometimes the zone isnt even listed in the pulldowns so I can not manually fix the problemm.

My suspicion is that maybe there is a memory leak with EQMap and its not a Fetish issue. But I wanted to check with you to see if you had heard of this map behavior.

Thanks for any pointers.

**Zonx** · #4 08-07-2005, 10:58 AM

Version 4.4 is available for download.

Version notes

Don't forget to rate the download and add it to your favorites if you haven't already

Mondain · #5 07-20-2005, 10:12 PM

Alas, my game is crashing with Fetish now, so I had to set it back to the normal GUI for the time being. *sob*

This was SO depressing! I totally had forgotten how terrible the old SOE UI was! How can anyone play that way? Hey SOE, why dont you pay Zonx losta money and let HIM do your UI!

For the love of the lost Gods of Norrath, PLS make an update, I can't stand this horrible SOE GUI!

**Zonx** · #6 07-20-2005, 10:52 PM

Can you elaborate? So far the only issue with FNF 4.3 I've seen is that the target windows are now resetting to default size.

scowiii · #7 07-20-2005, 11:12 PM

Yeah I had the same problem. I would log in to game and as soon as zone would almost lode would get a critical error and it would dump me out of game. I removed all files and reinstalled game and then reloded UI and it gave me the same error. I removed the Fetich and it runs perfect albight everything stinks now because everything is huge again.

Lamax · #8 07-21-2005, 02:52 AM

Exact same issue for me

since this morning on both PC I have.

Great UI btw

Mondain · #9 07-21-2005, 02:14 PM

Sorry Zonx, likely I used a Version older than 4.3 (somehow I lost track of my version.) I downloaded 4.3 and it works.

Have I said how great your GUI is? Well, its the best.

Sorry for the false alert. *sweatdrop*

klevious · #10 07-21-2005, 03:17 PM

the only problem i am having is sending an item in the mail.... i can place an item in the mail slot but the send button does not light up?

any suggestions?

this only started happening after the update.

avs5221 · #11 12-01-2005, 11:02 PM

Crumb. EQ2 crashed on me, so I relogged to find that I had xp debt, so I obviously died before going ld. The problem is, right after the zone loads, I can tell the revive screen is about to come up, but then I crash to desktop, and I can't get past that point. Any help would be appreciated b/c I love this ui. Uh, yeah, have lu17, using 5.0, I think that's about it.

Loktha · #12 12-01-2005, 11:03 PM

The newest version is 5.1 and takes care of any issues with LU17. It is available for download now.

johnpgriffiths · #13 07-10-2005, 07:12 AM

Following an eq2 client crash, I logged back in to find myself dead (no great surprise there) but the revive window did not appear. I'm using Fetish Nightfall 4.3. I tried relogging but got exactly the same. I logged out and reverted to the standard eq interface and the revive window appeared as I would expect. Not something that will happen too often (hopefully) but any way around it ?

**Zonx** · #14 07-10-2005, 09:44 AM

johnpgriffiths, that's a new one on me. The death window has remained virtually unchanged since it was originally reskined for 3.0 and this has never come up. Might have been a fluke or maybe SOE changed something recently that bugs the window for any custom UI. In either case, I doubt there's anything I can do fix.

Linna · #15 07-13-2005, 06:30 PM

First off, thank you for the great UI Zonx this is by far the best one I've seen out there. I simply love it.

Does anyone happen to know a work around for the skills window not working, until an update is posted? Thanks in advance

Ancient1 · #16 07-14-2005, 01:19 AM

For some unknown reseaon, on one of my toons the XP Bar is no where to be found. It is there on my other toon. I believe it is toggled with alt-x . Help?

Ancient1 · #17 07-14-2005, 09:54 AM

ZONX,

I have a problem with the raid window. There does not seem to be a right edge or a bottom edge to the window. The only thing I can do is grab the top edge and move the raid window all the way to the bottom. Otherwise that window will overlay everything else. Sometime I perfer the raid window to be vertical and there does not seem to be a way to do that.

Thanks

NJ_Devils · #18 07-22-2005, 07:02 PM

Zonx, I am using your nightfall and Taoo' s auto map updater and from time to time I will notice Antoica map POI while in Nektolus Forest, or simmaler problems. I have been able to correct this properly choosing the corract map in dropdown, however if i close the map and reopen it goes right back to the same issue. Is there anything you know of that is causing this?

ShadowProwler420 · #19 07-27-2005, 04:30 PM

Quote:

Originally Posted by NJ_Devils

Zonx, I am using your nightfall and Taoo' s auto map updater and from time to time I will notice Antoica map POI while in Nektolus Forest, or simmaler problems. I have been able to correct this properly choosing the corract map in dropdown, however if i close the map and reopen it goes right back to the same issue. Is there anything you know of that is causing this?

Any word on this? I have been having the same problem, as well.

Kromulis · #20 07-27-2005, 06:15 PM

Any word on a new version zonx?

Binton · #21 07-27-2005, 07:37 PM

I was wondering if my eyes were deceiving me and my Target windows were resizing back down. Hehe, I was like... did it... nah... wait... yup, it did.

I had recently switched to a large 24" widescreen monitor and went from 1280x1024 resolution to 1920x1200 and the same day the new patch came out, I thought it was the resolution change screwing with my eyes, hehe.

Hey Zonx! How ya been man? I've been away for a little while and haven't gotten to add my input lately. Curious if there's a chance to have the information at the top of the guild window's 'event or main' page show on all the pages. That's good stuff.

skyrocket · #22 08-03-2005, 01:42 PM

I have 2 questions.

1- Is the target window problem just with Fetish Nightfall or all of the ui's?

2- If I need to use the default persona window what file do i need to delete to use this?

Thanks

Spaniel
FoH

Kenelm · #23 08-04-2005, 12:03 PM

Quote:

Originally Posted by Lazaru5

Any word on this? I have been having the same problem, as well.

Easiest fix I found was to reinstall the original map back. You get all the nice icons just no drop down and no errors with wrong POIs on wrong map. Works like a charm.

drplett · #24 08-03-2005, 07:08 PM

This is the GREATEST ui mod ever. Thanks!!! Just wanted to let you know that the link to EQ2 maps at the start of the thread does not go to EQ2 maps.

Curate · #25 08-03-2005, 08:31 PM

I really enjoy the UI however have a problem that just bugs me.. some of the fonts seems squished together..

In the broker window I can't read the name of the seller it's just squished so close together.. and it appears to be the same font on the Clock window that tells me the time of day and year i cant make any of that out.

Any Ideas?
Thanks
Curate