Darqwood

Thank you for your comments Accredo, glad you're enjoying the UI. The "new" browser has not yet been added to the DarqUI updater because it's scheduled to go in with several other pieces in a larger update between now and the next GU later in February. You can continue to use the one you downloaded from the thread on the forums. Just replace the file that came from the updater, and check the "Skip" column on the browser in the utility so you won't overwrite it next time you get updates. Any in-game favorites that you set up previously should get picked up again.


.

Accredo

Hi Darq:

I tried the following macro in the Command line of the raid, set1 but it doesn't seem to work. alias assist_Tank:assist %T.
Normally it's expressed as /alias assist_Tank:assist %T. This assigns the target (person)) as the main assist. Then using the /assist_tank macro to assist.

I tried placing it in the command line in the 5th order (since I really don't have a spell to place there) and Assign MT in the tooltip.
Is the use of this macro possible in your utility? If so would you have any suggestions how to get it to work.

Using the in-game macro, the steps are as follows:
1. target the person who's going to be the main tank
2. Click the /alias assist_Tank:assist %T macro
3. Clear target
4. Use the /assist_tank macro

I use the above to assign the MT and MA. The assign command remains on that person until I reassign them, as the raid changes through out the night. It saves having to type names with compound letters, i.e iii ttt, llll etc.

Thanks
Accredo

Accredo

Hi Darq: I just started getting this exception the other day when I start your utility.

My system spec:
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 Six-Core
GIGABYTE GV-R787OC-2GD Radeon HD 7870 GHz Edition 2GB 256-bit
ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0
COOLER MASTER HAF X Black Steel/ Plastic ATX w/tons of cooling
CORSAIR Hydro Series H100
Dual ASUS Black 24" 2ms HDMI LED monitors
G.SKILL Ripjaws Z Series 16GB (4 x 4GB)
Corsair Vengeance K90 Black/Metal USB keyboard
CORSAIR HX Series 750W SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular PSU
Dual Corsair Force GT Series 180GB SATA III Internal SSD's


************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at DarqUI.Form1.Check_Updates()
at DarqUI.Form1.Timer1_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
DarqUI Window Utility
Assembly Version: 2.3.2.0
Win32 Version: 2.3.2.0
CodeBase: file:///C:/Users/WLP/Desktop/DarqUI%20Window%20Utility.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Xml.Linq
Assembly Version: 3.5.0.0
Win32 Version: 3.5.30729.5420 built by: Win7SP1
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml.Linq/3.5.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------
System.Core
Assembly Version: 3.5.0.0
Win32 Version: 3.5.30729.5420 built by: Win7SP1
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

Darqwood

On the macro command, you only need to put quotes around the colon, as in

alias assist_Tank":"assist %T


On the exception, turn off "Check for updates on startup" on the Settings tab (you'll have to be quick about it when you open the utility, you have about 5 seconds before it checks automatically.) Close and re-open the utility, then manually check for updates on the Updates tab and tell me if you get the same error.


.

Accredo

Thanks a lot Darq, your solutions for both the alias command and the exceptions worked. However the group tell doesn't work now: Giving Mana to statement for example doesn't appear in group but does in raid and/or tell, not that I use that in all three. No announcement I place in the group chat across from the spell works.

everlost

i got a new computer ,i had darq on my other one ,but for some strange reason it refuses to work on my new one ,i made a new file for it and it still wont work,also why is my eq2map in my ui folder?

Darqwood

Try replacing the double-quotes with single-quotes on your macro. I'm still not where I can test it, but that's the only thing I can think of that would foul up the tell string.


.

Darqwood

Everlost, when you say it won't work, do you mean the utility will not open?


.

everlost

yes ,i go into eq2 and try to change my ui and its not even showing up, i tried
to make a folder and that still didnt work i have the darq short cut (?) there but when i click on it the page opens ,but wont update ,it says cant connect to server try again.

Darqwood

If you are consistently not connecting to the server, try turning off your firewall just long enough to get updates. The utility looks for the update server once, and will not proceed if it can't find it. Some firewalls prevent checking for a server in this manner.



.

GCT

EDIT: I found it! Had to use the window settings finder thingy.

I recently uninstalled EQ2Maps so that I could get the clock in this set working. This UI works perfectly except for that.

All I'm seeing is the map with the round clock attached to it. I'm not really interested in the countdown timer -- what I really want is to be able to see both Earth time and Norrath time without having to mouse over.

necrose99

10 slots would be good Insted of 8

Unlike Everquest were thier are 35,000 or better on the AA cap (Gold) and

9 AA opens all Tradeskills , 3+6+9 keeps from failing em... and opens Salvage at about the same

Eq2 other than adorning or Tinkering it takes 9 toons to craft them all...

Our guild is rather Crafty.... anyhow for DRAQUI

2.33 an updater script to remove Drqui.exe-old rename draqui_delta.exe
would be a real plus. IE if draqui exe 2.3.4 his no problemo it will download and self update.

expand from 8 slots to 10. on Charicters (eq2 is far faster to lvl TS'ers or LVvs)

necrose99

http://www.eq2interface.com/forums/member.php?u=30990

I have Tried to get this to run but no luck ,

only reson would on raids or PVP have mainline grp pet buffs scripted to go on rez.

Draqui is like Crack to Eq2 additcs

Darqwood

necrose99, I'm working on some things that will allow you to set up more characters with DarqUI. Stay tuned.


.

Seipherwood

Just curious, is it possible to put Icons on the top of the Target / Implied window instead of the bottom? Was tryin to make a new UI and put stuff at the bottom but in raids its covering up way to much stuff since it bloats down.