[keezyrick]

Ok, I have verified that without changing anything (your new window or mine), the window will fail (truncate text) between zones updated and zones not updated since the mod.

I have attached two antonica zone files.

antonica_0.xml was included in my modification in UIBuilder and was touched by changes during that process. Although I did not edit the file directly (or any of its settings), it was obviously affected by changes to the scrollpage.xml and sizing changes to the window in the 'play' mode in UIBuilder.

antonica_1.xml was updated during the automatic update. It was originally part of the zip file I uploaded, but the recent updater run has replaced it, so I have included it to help test this issue. The updater did not replace antonica_0.xml.

Since antonica_0.xml was not touched by the update, I zoned in there and everything was fine. I moved to the other side of the zone and antonica_1.xml information loads and it cuts off the information as reported.

Going back to the other zone works fine.

This supports my original conclusion that the scroll adjustments for the OnShow command in the zone files are affecting the text and causing it to be cutoff in the window.

Not sure what can be done to resolve this short of either turning off autoupdates (I have chosen to do this), or removing the code in zone files to adjust scroll width.

This is obviously only a problem with my mod since it allows for an adjustable width window and the zone files assumed a static width window. As such it is a low priority, but the investigation has been interesting and I hope it helps to create a more flexible UI mod.

I really appreciate all the help and the mod itself (POIFinder).