EQ2Interface

EQ2Interface (https://www.eq2interface.com/forums/index.php)

- ProfitUI (https://www.eq2interface.com/forums/forumdisplay.php?f=41)

- - LoN (https://www.eq2interface.com/forums/showthread.php?t=8971)

Is there a fix or work-around to display the in-game LoN window (other then defaulting to default UI)? When I type /tcg I get the LoN window but you can tell its not complete.

Thanks!!

Top Headline on the Front Page has a fix for this.

Ah thanks! Guess I should read that once and awhile lol.

NP. I'm just glad that it was that easy to fix :)

Another fix would be to use the latest version.

Quote:

Originally Posted by gm9 (Post 61873)

Another fix would be to use the latest version.

GM9, does the latest version fix the problem with the LoN window being too huge on widescreen monitors? Tried doing some stuff manually to no avail.

Not sure what the issue is - it looked ok on my system when it first came out, and I suppose you can call 2560x1024 widescreen, but no, ProfitUI does not fix anything, the window has not been modded (or even included) in any way, it just let's you use the default LoN window.

I use a 24" widescreen monitor and have 0 issues with LoN ui so its not a generic widescreen issue.

Yeah its certainly not a generic widescreen issue, but most windescreen users are complaining on the soe forums b/c the LoN window is 4:3 aspect and not adjustable. So on my 15.4 widescreen laptop it clips the top and bottom slightly; and I cannot up my resolution any further. Oh well. :(

I adjusted my window fine are you sure youre just not finding the resize controls?

I am also experiencing issues when using FetishUI and trying to open LoN. I am running 1440x900 and the LoN window pops up but the top 10-15% of the window is clipped. I can drag the window down but then the bottom of the window gets clipped off, almost as if I cannot display any part of the LoN window below the bottom 1/3 of my screen.

Any thoughts would be appreciated.

Okay, I think I found a solution for my issues in another forum (thanks to Othesus). I will quote his answer below:

Quote:

Here's your problem.

The entire Default UI is based on a screen/window resolution of 1024x768. Window locations are saved relative to this size. Each window location can be saved so that its left edge sits on the left side, the top edge sits at the top, the right edge stays on the right, or the bottom edge stays at the bottom. When you switch to a resolution other than 1024x768 every child window can move or resize automatically so that they stay on the edges of the screen.

The Fetish UI is based on a screen/window resolution of 1280x1024. So, if you put a window from the Default UI into the Fetish UI, if the window's right or bottom edge is stored relative to a 1024x768 screen size it's not going to look right.

To fix this problem copy the file called eq2ui_mainhud_tcg.xml to your custom UI folder and go to line 2. In the Default UI it says:

<Page AbsorbsInput="false" eq2opensound="ui_window_main_open" MinimumSize="900,200" Name="TCG" PackSize="a,a" PackSizeProp="0000/0001,0000/0001" ScrollExtent="1024,768" Size="1024,768" Visible="false">

Change that line to:

<Page AbsorbsInput="false" eq2opensound="ui_window_main_open" MinimumSize="900,200" Name="TCG" PackSize="a,a" PackSizeProp="0000/0001,0000/0001" ScrollExtent="1280,1024" Size="1280,1024" Visible="false">

That should fix it I think.

my LoN widnow is bugged

Is see only the shield with sword, the orange cards and the book.
No Letters and background is black.
And when I start LoN (by clicking the cards or shield) it is not in a window i cant move it.

Quote:

Originally Posted by the.only.one (Post 61982)

If you haven't updated your UI it will be like that.

The main LoN window can't be moved even in the default UI as far as i know.

I am good now, they patched the fix so you can resize the window in-game which now helps hehe.