EQ2Interface

EQ2Interface (https://www.eq2interface.com/forums/index.php)
-   EQ2MAP (https://www.eq2interface.com/forums/forumdisplay.php?f=34)
-   -   Drafling Tower map (https://www.eq2interface.com/forums/showthread.php?t=3216)

Einyen 06-07-2005 06:49 PM

Drafling Tower map
 
1 Attachment(s)
Here is log from Drafling Tower the bee-hive zone in Rivervale. Zonename is drafling_tower:

eq2log_Einyen.txt

Zone wall color is brown/lightbrown/yellowish hexagons (bee-hive).

Dolby 06-07-2005 07:15 PM

Thanks Einyen. I'll try to work on it in the next couple days. :)

Dolby 06-08-2005 06:16 PM

1 Attachment(s)
I have some questions. The first room I have 2 red arrows pointing at got a little messed up. How does it look so I can try and fix it?

The 2nd room with 1 arrow is the small u shaped thing a wall? or what?

Where is the zone in? Is it in that small room to the upper left?

Other then that nice job on the map. Its going to take me a while to get this one working because I'll need to split it into an east/west map.

Einyen 06-09-2005 10:52 AM

Zonein is the small room with exit south eastnortheast of your upper most arrow and northeast of the room with 4 circles in it.

The room all northwest on the map is the final Queen room.

The room with 2 arrows is tricky. You enter from the south and find you are high up on a ledge looking down on the rest of the room. The ledge goes alittle east at same z-level and then stops. West the ledge slopes down following the wall so you end up down in the main room at about east wall. I wasn't sure how to map it. Let me try map the room again.

The room with 1 arrow and the 2 other rooms like it east and northeast: You enter a small room which is the U-shaped thing and it should be connected to tunnel walls. Then you can climb up that wall and there is a ledge running up there which is the bigger hexagonal wall. Actually there is a 2nd ledge even higher up and further out but not sure how to get up there or if its even possible.

Einyen 06-09-2005 12:17 PM

I remapped the ledge room which is actually called "Jum-Jum Refinery". I mapped the lowerroom and then the ledge/upper part:
lowerroom.txt
ledge.txt
here is an image of it:



I also remapped the big square room:
bigroom.txt
the room has a dropdown from east to west at the red line I indicated, its not too steep all the way, you can get back up some places:

There is a tap which updates "By Hook or By..." Heritage quest at loc +350 +20 +110 (just west of dropdown): http://eq2.ogaming.com/db/quests/ByHookorBy....php

After seeing Rukir you need to go back to Queen room for another update in "By Hook or By...". It updates just by moving into queen room.

Dolby 06-09-2005 01:04 PM

Thanks for all the information that helps alot! I hope finish this soon.

SaintPeter 08-16-2005 02:30 PM

Uh . . Bump?

Dolby -
Are you going to finish this, or should I take a crack at it?

Dolby 08-17-2005 03:27 PM

Quote:

Originally Posted by SaintPeter
Uh . . Bump?

Dolby -
Are you going to finish this, or should I take a crack at it?

Sorry I've been so busy as of late. I totaly forgot about this map. If you would like to work on it please go ahead. All I've done was render it to png I didnt do any photoshop work yet.


All times are GMT -5. The time now is 03:32 AM.

vBulletin® - Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
© MMOUI