Alt U brings that window up I believe

Hello..

I miss the NightVision Button in the Commandcenter...its soo dark :(

Is there a chance to get them? I love the UI and the Center....but need the Button "gg"

UPDATE

Sorry....i'mblind...have found the Button ..its by the Startbutton...dumb
"gg"

To add the dressing room to the current Eliteui package...

Edit eq2ui_inventory.xml to add this line near the bottom:
<include>eq2ui_inventory_dressingroom.xml</include>

Check your installation. Are you modifying the Compilation in any way? To me it sounds like you have not used the enclosed mainhud.xml. Let me know. It's best to install the UI package first. If you know what you are doing, then add your changes, if not I would not recommend modifying the Compilation.

Hopefully this helps others as well. I had this same issue and had to go into options to manually turn off "Keep Main HUD visible" and then do an Alt-U to bring the Self > Target > Implied window back. When I just did an Alt-U, it said "That window cannot be hidden" so I needed to do the above. I finally turned the "Keep Main HUD visible" switch back on to hopefully lock it in place once more.

Thanks for the great UI!

Hey. I recently downloaded your UI and ran into a problem. about that known bug, the EQ2 button to go to options and all that wont show up.. It shows up on all characters BUT one! I have restarted EQ2 many times, restarted my PC and nothing changes.. Please help! By the way, I love the compilation.

Game Crash on LFG Window
 

I love this UI, It is perfect except it crashes my game on the LFG screen. I cant get it to stop. Any assistance would be great. Thank you in advance.

Faldiin

alt-z is supposed to bring up the zone reuse timer window. when you do that though, it says that it is not compatible with the current UI. might wanna take a look at this and see about fixing.

Any Plans for a update with Fetish 9 ?
I hope :)

Update soon.
 

Update coming in the next week. Had some out of town excursions. =]

Val

Update soon.
 

Finalizing the update. I should be ready to upload it tomorrow (Sun). Thanks for your patience guys.

Val

Live Update 37
 

((EliteUI - A Fetish Nightfall Compilation))
Patch 37 Compliant - 08192007 Release
Full Installation Package of over 20 Interface pieces spanning 13 EQ2Interface authors!

Updated... Enjoy!

Error
 

Hello,

I'm trying to install this UI for the Test server only. To be honest i'm not even sure this can be done. I'm using the same instructions as for normal install, but putting everyone into eq2/TestServer/UI and so on. Install goes ok, however when i start up the game, it gives me an error right before it gets to Character Select.

Everquest 2 has encountered a fatal error and must close.
verify="D:\test\eq2\game\client\src\NCS2.cpp(1868): Missing required window: NCS2Slideshow

Any ideas?

Thanks folks for your help,
Kia

...
 

hmmm no clue here, never played around on TC.

Thanks for the great UI, but I've encountered a couple problems with LON...

1. On the initial LON screen (which is a window in EQ2) there are no words, only symbols (Book, Shield/Sword, and Cards)

2. LON will not open windowed... it only opens fullscreen on top of EQ2, everyone I know who doesn't use EliteUI can play it windowed.

Ya, I'm having this issue now after LU#38. I had to revert to the default UI just to even get the game to start. Any idea what this is or if it will be patched??

EliteUI has been consistently released since LU11. I have no plan to update it for LU38. /sarcasm off

When I have some time I will get it done, author's don't usually release updates on the DAY of the LU. Especially compilations authors like me, our release dates are often based on other author's release dates. Have a little more patience than one day.

Ummm.. Thanks?
The reason I asked was because the few places I found any threads regarding this, from a couple different places on the net, there was no reply to the apparent problem. Some people have apparently had this problem prior to LU38, but I had not experienced it until today.
I was only wondering if this was related to something in the past. I don't expect the UIs to be patched within seconds of a LU.

Pardon me for requesting information. "/sarcasm off"

LON fix
 

I apologize for being snippy. With every LU every UI author gets bombarded with replies to threads, private messages, etc with whining and complaining; it eventually gets overwhelming and pushes ya over the edge lol.

That being said.

Ok so for whatever reason, the eq2ui_mainhud.xml header is throwing LON off.

Open your eq2ui_mainhud.xml into a text editor and edit the following segment.

ScrollExtent="1280,1024" Size="1280,1024"

Change the values to 1024,786...

ScrollExtent="1024,768" Size="1024,768"

That fixes the moving/minimizing/chopping off part of the window issue.

Remember to remove your eq2ui_inventory_inventory.xml from your EliteUI folder to default to the updated default inventory window, so you can utilize the new appearance tab.

Thanks for the LON fix... you're the best.

Keep up the good work, I absolutely LOVE eliteUI:nana:

Love this UI but so far no luck getting into game with LU38 tried the fix above but still get the same error. I'll keep watching.

Here's a little summary of a couple posts I found on these boards. Try this.

Deleting the file eq2ui_newcharscene2.xml from your UI directory should fix you up with this particular error.

1. Verify that you have deleted the eq2ui_newcharscene2.xml file and not the eq2ui_newcharscene.xml or eq2ui_newcharscene1.xml files if they exist. AND that it was removed from the Fetish directory and not the Default directory.

2. Remove any variation of eq2ui_newcharscene... that you might have in your Fetish directory.

3. Try removing eq2ui_loginscene.xml to see if it helps.

thanks alot... removing those 2 files helped me alot :)

What I did...
 

What I did for a fix for LU38 to keep my EliteUI running was download the newly released Fetish Nightfall 9.1 package and replace the changed files in my UI/EliteUI directory. You can find a list of the changed and new files on the main page here on EQ2interface. I'm able to use the character select and the appearance tab on my inventory with no problems.

Note that not all of the changed files were there; I just replaced what I could, and I've put in about eight hours of gameplay with no crashes or noticable problems with gameplay thusfar.

Hope this helps keep everyone up and running, and give our author a bit more time. This complilation can't be an easy one to ochestrate.

I should have an update in the next few days. Looking to add a couple new features.

This worked perfecty for me!! Thanks again for all of your hard work!

((EliteUI - A Fetish Nightfall Compilation))
Patch 38 Compliant - 09252007 Release
Full Installation Package of over 20 Interface pieces spanning 13 EQ2Interface authors!

Updated... Enjoy!

Info on update at top of this thread.

Don't forget to click the [Add to my Favorites] button down below!

(Might be a delay in posting for verification by the host)

Mhhh....have load the Update and now i miss the Self ---> Target ---> Implied Window...

Alt + U doesnt help :(

Is there any solution? I need that window

Patches uploaded
 

Patches have been uploaded.

P1: fixes the bank icon issue.
P2: Corrects the version of the Player window (correctly toggles the PlayerTarget window), as well as adds the Group abilities by Alethus.
P3: Adds the missing file for the group window by Alethus.

The full install package has been updated with both patches, if you are downloading EliteUI-092507p3 you do not need to worry about patching.

Enjoy.

Question & Comment.
 

1st...I love this UI. I downloaded it for LU37. I've been hooked since then on it.

Problem... I'm very green to applying alternate UI's as I just mentioned w/ LU37. It is likely something that I am doing or something I'm missing. I don't understand the problem I'm having though. If I log in w/out going to character select...life is great! If i attempt to log into character select...I get the following error:

Everquest II has detected an unrecoverable error and must shut down.

<verify> D:\live\eq2\game\client\src\NCS2.cpp (1868):
Missing required window: NCS2slideshow

Thank you SO VERY MUCH for your help! I do love the UI!

//signed//
Moneylicious, Firefly & Hallucinogen
Butcherblock Server

Sounds like you haven't updated to the latest version? There is a LU38 version. Check that first and let me know.

Add a new patch to that list...

P4: Fixes an issue with the PoiFinder Interface / Updates to the latest version.

click to cure
 

I am not sure if i am not doing something right or what but i am a warden and so the click to cure is important to me and i see the click to cure buttons but they are light and i dont show them getting brighter when my group gets hit so do i have to go edit files or something for this one to work corrrectly?
but i change UI alot i will find things that i dont like or someone comes out with a new UI i liek better and well have to say i am a picky person and so far you have come up with so much that i like you rock thanks so much

Hmmm, lemme check into this on my next outing. So far I have not had any other reports of the click-cures not working.

click to cure
 

there is no click to cure on player window either or am i missing something it is just much easyer to see what cure you have to clear if it just lights up a little insted of going threw spells ya i know some people are spoiled but make it so much eaiser for us pvp'ers
thanks so much for taking time to respond to me

The player window itself never had click-2-cures. However, the player/target/implied combo window does. I know that works, as I just used it last night lol.

Group Window
 

I am getting reports that the new modified group window is not having the effect icons light up. I'll look into that this weekend when I have some time.

Val

what do I need to delete in order to remove these two windows from your UI package? :




Thank you in advance,

Great UI btw.

update 39
 

I can;t find the right file to add this too. Finding all the mainhud files but which one do i put it in? not finding the one that just says mainhud.xml

Any updates plan for Update 39?