The new notes window is great, but can we have scroll bars or something for the tabs please?

Hmm never thought of that:P Can you tell I don't use it;P lol I'll get some scroll buttons added to it.

Yes the quest window was default :eek: not any more though:)

Disclaimer

The installer, uninstaller, UI and AUCP holds no warranty and you agree to use it at your own risk. The developer(s) of any used components and the author (me) can not be held to any legal terms and/or bindings by you agreeing to us this software.
By downloading this (eXtremeUI) package you agree to the above terms.
The installer, uninstaller, UI and AUCP package was scanned for viruses by AGV 7.1.375 Virus base: 268.1.1/272 Release date 3/8/2006 4:00:00PM and was found to be free of viruses on 3/8/2006 9:58PM at the time of uploading.

*Source code for the installer/uninstaller and AUCP is available by emailing a request to me @ [email protected] or a privet PM through this site.

ETA for updating broker window for t7 resources
 

Hey Landiin,

Do you have any plans to update the broker window to add the t7 resources to the drop down box.
I tried to go in and edit some of these, but it does not work correctly after doing so.

The AutoUpdater is working great for me, not a single problem. :D :D


Sam

While exploreing the control panel for the first time while it was updating i noticed that when i got back to the first tab (the updater had finnished and gone to update eq2 map) i got an error sound and a little windo stateing "Out of System Resources"

is this something to worry about?

any info is greatly appreciated thanks

Grace37 :D

UPDATE

It has stoped doing this after i closed it and opened it again one problem i AM haveing is when i click help on the control panel i get topics but nothing else.
Also in the game when i use the info center most of the pages are eather blank or seem to have been cut short.

This UI is definatle the best out there i am not one for useing custom UI's but this one won me over SUPERB JOB keep up the GREAT work.

I'll look that info up and get it added.

I'm not sure about the out of Resources error you got. I'll monitor its used resources again tonight and see if its leaking anything out.

I havn't checked the info center in a while. I'll look at it and see if I may of goofed it up.

I had exactly the same problem.

Aa
 

PLEASE make an AA window!

Its there.

Buffs on others
 

Having a bit of an issue maybe someone can help me with:

Normaly I don't care, but t7 is starting to make buffs on mob more of an issue. In the default UI there is additional information in the target window that shows the buffs on your target, and again on your implied target. I have noticed that I can get those buffs to pop up, but only for a second before they disapear if i switch targets.

Is this a UI setting somewhere I have wrong? Or is the custom UI not handeling this right?

No it's a UI issue atm:( SOE forces the icons to the bottom just past the bottom of the target/implied. In default the window will expand down to show these icons. As you see that will not work in eXtreme because of its lay out. I have put in some code to try and force them to the top and that's why some times you see them and sometimes you don't. ( my code wins the war some times)

Now that the updater is done, I'll work on getting the corrected.

Thanks!!! I have missed this also.

Harvest Window
 

How do you bring up the harvest window that you have in one of your screenshots?

Them are old screen shots that I need to get updated.

Instead of trying to keep up with all the new info, I have incorporated Milquetowst Info Center into the UI as he is up todate on all that info and has made a well rounded package to display it. You can access the info center by pressing the info button on the experience window.

pet window
 

i love the extreme UI but....because i am a necromancer there are some issues with the pet window, for one it doesnt have the attack, guard me, guard himself, die, or stop combat :) it would be VERY helpful if you could include this into your next update

Under the window options toggle the frames and the buttons will show.. Once you do this they will show from then on..

Ok I had tried this UI in the past and there was some issues so I didnt use it. I just downloaded this new version today and installed it but when I go into the game it looks nothing like the images. I have several new looking items on the screen but I have windows that I cant do anything with. I really confused and so Im going to wipe the directory and try again but if anyone else knows why this may be I sure would love to hear from you as this does look like a great UI.

Go to settings, then click on advanced options and set up your uisettings.ini file.

Been with ya since LU15 or so... Another Thumbs Up :) Thank You!

Latest version seems to be missing the "add" button for collections. You can still drag-drop items into collections though...
Great UI by the way!

Some Issues
 

Hi Landiin,

I have a few problems with the new UI that I made screenshots of. In the 1st screenshot you can see there's a problem with the dropdown menu in the center. The others have blank info for each of those tabs. As for everything else, I have no problems with anything else. Gotta love this UI :D

Thanx Landin for the help. I was there at that spot but was expecting to be able to edit the settings and did not see a way to do that. Once I selected the ini file and resolution things did start to look right. So far I have noticed though that the targeting and implied targeting does not appear to come up and the pet bar is only showing the pets health and power but none of the options to attack or anything show up. Thats it so far but it does really look good so keep up the good work! :cool:

No AA
 

there is no AA window to spend your points in, unless im bugged, but when i press L i only see tradeskill/utility/adventure.. no AA

Two things could cause this.
1. You are not using the current version
2. you didn't remove the foreign files the updater told you about that could cause issues if not removed.

FIxed and updated to the current version.

If it is there in default it should be there in the one I offer. All I did was move the detailes window to the side from the bottom.

That's an issue with the letter box frame. All windows position is relative to the size of the letter box frame. So if you have a different letter box frame setting then what was used setting up the uisettings.ini file things will be off.

You can probably find the targeting windows under the start window. just unlock it and move it out of the way then reposition the targeting windows.

I just fixed the pet window so the command buttons would show. I had mistakenly left in some old code that would switch between icon or button commands. I have taken out the button commands but left in the code to switch between the two. It should be good now. Before you would have to turn off the frames to see the icon commands.

Ah good to hear you resolved the pet window - I moved all the windows that could be possibly covering the targeting and did not find it. I will check it out again and see if there might be something else im missing. Thanx for all your efforts and for being so responsive.

dont for get to alt + p ( 'I THINK" ) or what ever the key combo is to get the pet wendow to show.

I know this has been asked before .. but when I go from full screen to windowed then back to full the text boxes on the bottom get offset down by about half a text line down .. seems the whole window gets shifted down. I'm pretty sure I have it set so windows can't be shown offscreen so in theory this shouldn't happen .. but it is :)

Now I'm assuming this could be a sony issue, but in the off chance it isn't is this fixable? I now have 2 chat boxes in the bottom and they both experience the same thing

Thanks

I think this is a SOE issue. I'll check it with default later but mine does the same thing.

Would like to point out that in the UI Control Panel, the web browser for EQ2Map doesn't resize with the rest of the window.

will fix, thanks for pointing that out.

OK, I'm probably simply not looking in the right place, but....
 

I can't seem to find the background.dds, in order to change to something else.... Where should I be looking?
BTW I've been using your UI for so long now, I have no idea anymore what the original is like, I love it!

...\Sony\EverQuest II\UI\eXtreme\images\background.dds

A couple more problems I'm having.
 

I had just downloaded the latest version, un-installed the old, then ran the installer. Everything was working great, but I never had to select a character ui file(Did you change this?). I then ran the control panel, it told me there was nothing new to downlaod, so I launch the game, but when I get there, I only have default ui. I tried /loadui, but there was only default there.
Also, when I tried to close the control panel I got this message "Access violation at address 00000022. Read of address 00000022." I ended up doing a ctrl+alt+del end task to get it to close, after which I can't bring up the control panel at all anymore, I click it, but nothing happens.
I've tried uninstalling and the re-installing it, I've even re-downloaded and get the same thing.
Any idea what I'm doing wrong here?

its in the images folder :) :)

Interesting...

Are you located in the U.S.? I ask because the UI directory is in a totally different location with none U.S. clients and you have to install it a special way if this is the case. I also think the eq2.ini is not in the same place as U.S. installed clients. Because the AUCP reads this file to make sure eXtreme is the default UI. So if you didn't get a messagebox asking if you wanted to set eXtreme as your default UI then if found that file and seen eXtreme was set to default. Maybe post a Screen Shot of your everquest ii directory.

Any way; the uisettings did change, You can to it by going to settings-> advanced options ( its a button at the bottom). This will bring up a new window where you can select the uisettings.ini file you want to use along with the resolutions available.

No, I'm not in the US. I think I know what you mean about having to load it to a different file though, (I 've been using your UI for quite sometime now, and installed it many times as well). I Install Extreme UI to my LP_REGION_EN_US file, as I've done every other time. Anyway, I just downlaoded it and I'm gonna try it out when the servers come back again. I still can't find the background.dds :-/ I've searched everywhere and I can't find it. Also, on the CP, I can't close it either, again. I get the same message as before. Is it possible that somehow, I'm not getting the complete Extreme files?
I'd send you a screen shot of my EQ2 directory, but I'm not sure how to do that :-/