EQ2Interface - ProfitUI update for 4/29 patch

EQ2Interface (https://www.eq2interface.com/forums/index.php)

- ProfitUI (https://www.eq2interface.com/forums/forumdisplay.php?f=41)

- - ProfitUI update for 4/29 patch (https://www.eq2interface.com/forums/showthread.php?t=17795)

used the new ProfitUI updater.
It offered 8 updated files, BUT I had to hit "cancel" like 7 or 8 times...
"could not update all files. please check error log"
that's the first time this ever happened to me. usually I expect maybe 1 file to be filtered out, but this time it looked like all of them were blocked...

here's the content of the log file:

Code:

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update C:/games/EQ2/eq2.ini

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update C:/games/EQ2/eq2.ini

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update C:/games/EQ2/eq2.ini

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update C:/games/EQ2/eq2.ini

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update C:/games/EQ2/eq2.ini

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update C:/games/EQ2/eq2.ini

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update C:/games/EQ2/eq2.ini

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update C:/games/EQ2/eq2.ini

I had this exact same issue & posted my comment here:
http://www.eq2interface.com/forums/s...9&postcount=25

I don't recall what the updated files were either.

Quote:

Originally Posted by Aeromier (Post 105129)

Last night everything was fine (5/3/14) but when I run it today it updated a few files & then I got an error. I look at the log file & found this. It errors constantly on this file.

d.p.u.s.core.model.Downloader - Wrong file hash - Could not update E:/Program Files (x86)/Games/Sony/EverQuest II/eq2.ini

Any ideas why this is happening all of a sudden? :(

Well someone did something because today I had 3 files in the updater (eq2.ini was one of them) & everything updated without a hitch.

Thanks for fixing whatever was wrong. :nana:

Quote:

Originally Posted by Conna (Post 105127)

......
I'd also like to request an update to the HP indicators to prevent them from wrapping when you're over the million HP mark, or if someone can tell me which file and what to edit I can try to tweak it myself.

Fixed it myself... no line wrapping for over 1 mil HP. Should also be ok for power.

File attached.