Had this problem a while back and it was down to me having not updated to the new path I made for the last groupmember, Have you downloaded the last version of this UI that I posted?

As for the pet window I havent had that problem before.

Anyone else having these two problems?

Okay, this is strange. when I am playing my necro, the pet window is there, but when I play my monk, and cast the deity pet, no window comes up. any thoughts??

yes you cant control that deity pet anymore :( I noticed lastnight when trying to park mine at the zone entrance as usual..

The latest trick seems to face a solid wall (make sure no room behind it) and summon your deity pet.. gets them stuck in the wall and doesn't follow you.. but they do manage to get free sometimes

Ah righto I will give that a go then :)

Knowing my luck it will be me that gets stuck in the wall lol

On that note one of my friends plays a Fae and keeps getting stuck in the mail box its so funny :p

Erollisi Day
 

I just get a black box when I talk to the quest giver...

Usualy getting just a black window up means that the <include> for the said window is missing in either the mainhud or the eq2ui file(s)

I have checked though both of them and dont see that anything is missing /shrug

Do you have the current version of this UI and did you DELETE all of the old folder contents before copying over the new contents? .. Minor as this may seem it is actualy very important.

plz help
 

It's usually the best UI ever seen. But there's two problems:



- ingame, i don't see my dots...... there's no way to cure myself !?


- also there's a grafik problem; at riding a horse, i see my head jump up and down ????!!!!!




Please help me

I will have a look at the "dots"

As for the horseback problem that is not a problem related to the actual UI so that I cannot fix :p

Heres the updated player window.. seems I had overlooked adding the icons lol

thank you very much !!!


(german player - my english iss very bad)

Not sure if anyone is paying attention to this anymore or not, but...

I installed the UI, followed all the instructions, tweaked a little until I actually had it right... And only knew I had done something right, when I had boxes in all the right places, but not the borders that drew me to this UI. Any suggestions for getting it in?

Make sure you have the background sliders in each windows options set to visible. I assume it is the background graphics you are referring to.

new oddity
 

okay with the most recent update there is now a new oddity. Basically the amount of XP you have is shown up as #.#.#% instead of #.#% (so it shows 30.2.2% instead of 30.2%). It shows up on both combat and tradeskill xp bars. Anyone else seeing this as well?

Yep...SOE changed how that is displayed and added the decimal portion so interface authors no longer have to add thier own.

This thread here will explain it better :)

Fixed it and its in the download section soon :)

Coming back to eq2 after a break and reinstalled eq2. I really enjoyed this ui so I reinstalled again. Problem is that the bottom part of the ui is all out of whack, mainly the spell windows and the target. I have used the eq2.ini and the 1280x1024 ini included with download. I have the letterbox off. Not sure what I am missing? I have changed the usersetting.ini to the proper format and I am in 1280x1024 mode also.

you have to set the hotbars sizes and icon sizes yourself now in game really .. there has been some major changes since you been offline.

I just downloaded this UI today looks good except I don't know how to load it up unfortunately

Place the "eq2.ini" file in C:\Program Files\Sony\EverQuest II

Then rename ONE of these files,

"server_character_eq2_uisettings(1200,1024).ini"

"server_charname_eq2_uisettings(1600,1200).ini"

To your server name and chars name, should look something like this,

unrest_muppet_eq2_uisettings.ini

And place that file into C:\Program Files\Sony\EverQuest II

Now your good to go..

;)

Hello everyone. Just trying out EQ2 for a bit, and am trying to use this interface.

I've got everything in the right place, using the 1280x1024 .ini file

I have all the windows in the right position for the most part, however, the small window between the target window and the hotbar 5, that shows health and mana, etc, isn't anywhere to be found.

Is it hidden somewhere?

Also, the pet window is the normal window - is there a skin specifically for the pet window to make it match?

Thanks!

That one should work, I think I finished changing all the styles before I stopped playing for a while.

The power bar window activates along with another window but I dont recall exactly what one so,

In options make sure that you allow all main hud windows to be closed

Then toggle (alt+u) twice if that dont make it show then (alt+t) , (alt+c) , (alt+p)

I thought I had this written down somplace but cant seem to find it lol .... post here and let me know :)

Having the same problem as greyyone here. Been trying to set the hotbar/icon size on my own but I can't make it look "right" - could you possibly post the numbers you'd use with the UI? :3

26-32 is what I normally use depending on the resolution, but I did notice a while back that it was better to set the hotbar icon size before you install the UI because afterwards the background tends to "snap" back to a smaller size leaving a few gaps in the skin so to speak, after much messing with the code I couldn't find a fool proof way to prevent this :(

Thanks a mill, Laffs! There is one other funky issue I'm noticing is that in the XP bar window the tradeskill and adventure info seems to overlap. I can set this back but upon zoning it goes back to overlapping. Gets kinds of messy. Is there a quick fix for this?

Hmm.. really need to see a screenshot please.. I have a good idea what the problem is , but need to see it before hand... I have not been playing EQ2 for about 4 months now.. and not aware of the problems..

:)

I'm having the same issue myself and I've tried every alt and ctrl window opening commands possible but I can't seem to get this particular window to open, is it even still in the UI?

Here ya go.

Try this one then (I had 2 windows with almost the same date stamp, I think I have edited the right one LOL)

Thanks, Laffs! Looks like that did the trick. However I am using your alternate player casting window so I think the main hud experience window is different. Could you update that one, please? Thanks! :)

Also I'm getting that weird Level Level [tradeskill] as you can see from the attachment. Sorry to be a pest. :(

Np will take a look at this sometime tomorrow for you :)

My apologies, I originally posted this in the file comments, before noticing the thread. So to repeat myself, and hopefully get some advice or encouraging news:


The only two problems I found with the RoK release (LU40) so far, are that the inventory ammo (mainhud.ammo) window simply won't display, leaving a gaping hole in the top-center of my UI, and as expected, the crafting window is borked. That one I expect to fix by removing it and using default for a while, but mainhud.ammo seems to be specific to this UI, and I don't know enough to make it work!

In reading a bit more on the forums here, it looks like Sony wanted all the new stuff that is currently dumped in mainhud moved to a custom ?file?, but wouldn't know what to do! Anyone?

RoK Release Problem found
 

Just one other problem to add to Grunthex's comment. I'm unable to get the Power Bar to display. Big hole and a bit of a problem when I flirt with running out of power quite frequently.

Great UI btw...Thanks a bunch for all your help in the past.

Tykster

I have PART-fixed the problem, but need someone who really understands UIs to do a proper fix.

The problem seems to be the Mainhud.ammo and Mainhud.memorized files. I think LU40 caused Sony not to like mainhud addons. The following will get you going for now:

Rename mainhud_ammo.xml and mainhud_memorized.xml to custom_ammo.xml and custom_memorized.xml. Copy from your default UI directory the new eq2ui_custom.xml. Edit it to <include> the 2 new ammo/memorized files. Edit your eq2ui.xml to <include> eq2ui_custom.xml

The problem now becomes that their location doesn't save when you log out, and you can't right-click to lock them, or remove the ugly titlebar on the power bar.

If anyone can tell me where to go next...

Just leave the include in eq2ui_mainhud.xml, the eq2ui_custom.xml is just a new option that I had requested.

You should then be able to show these windows via the command /show_window MainHUD.Ammo and /show_window MainHUD.Memorized (assuming that those are the names of those windows).

I'll leave your other post up for the moment but please don't do more cross-posts. Those that can help you generally read all posts here anyway.

Thanks that works for the memorized window so at least i can see my mana bar now but still can't get the bags to show up, which isin't too big a deal i suppose. Well at least till i can find a new UI i like just as much

Thanks GM9, that works -- Teril, though the file is mainhud_ammo, the window is actually called MainHUD.inventory

Should get you going again.

Awsome ty Grunthex! now i just gotta figure out how to keep em up

I don't know how Laffs used to do it but one possibility is to edit the eq2ui_mainhud_experience.xml, go to the second line and add the following after the <Page such that it looks like this:

<Page OnShow="show_window MainHUD.Memorized
show_window MainHUD.inventory" ...

(the line break is intentional, but don't enter the three points, that's just to indicate that you keep the rest of the line there). Before entering the above, make sure that the words OnShow don't already appear in the second line.

Hi, first off love the mod, looks great and streamlines my whole interface.

Thanks again for such a rocking UI :)

*edited since i manged to fix it, since when i installed the ui im a putz >.>