Darqwood

Lovebrat, DarqUI does not modify the AA/Prestige window, so you are seeing default behavior on that window. Make sure you are not trying to change the percentage on a character that is already maxed out. Also if I remember correctly, subscription level has an effect on the AA slider -- gold, silver, etc.


.

Lovebrat

<3 your UI & util. Since this new Scars bizzo came out, I am unable to slide the slider and change my AA and combat XP percentages. Mousing over the slider is giving me the "grab" icon and merely moving the window around. Sorry for my lack of technical terminology I'm a little tired - and old =)

I'm not sure what the problem is but I am sure someone will let me know please and thank you and g'night

Doh and yes I have updated to 2.3.3.1 and amended all my files -- ta!

Darqwood

Mermut, there is an updated DarqUI Raid window that addresses the above problem with Cure Check and cure class detection. Use the updater to get the new version and post here if you have any more trouble. Thank you for the heads-up on this.

Also, make sure you choose "Basic" mode from the right-click menu to get the icons to show up over the health bars -- I hijacked the mode function, so advanced and basic only control the location of the DarqUI spell icons. Cures are now always visible in both modes.


.

Mermut

I'm already used the advanced mode which shows the place holders for all the 'cures'... but I was unable to adjust the window to have the hotkeys over the health and power. I started the raid with it and the hotkeys, including the cure curse weren't working. Fortunately I had the zip file with 2.3.2 in it and restored that, then updated again but kept the old raid file. I'll experiment some more to see if the setting issues are on my side, but I did notice the lose of the 'style' on the raid setting that is still in the group setting.


I have/had cure curse set to announce to group and raid chat on click to cure and this is the what was put into chat
group: Parent.Spells1.Spell10.GSay
raid: Parent.Spells1.Spell10.RSay Liepha

Both should have been **** CURING CURSE on Liepha

Edit/note: Not only was the group/raid say incorrect, the cure curse did not go off.

Darqwood

Mermut, you can toggle between display modes by right-clicking the Raid window and choosing "Basic" or "Advanced." I knew this would likely cause some initial confusion, but moving this feature to the right-click menu cleaned up the custom code substantially.


.

Mermut

It looks like the option to have the quick keys over the health/power bars in the raid window have been lost. The option still exists for the group window, thankfully, but would you please restore the ability to set the raid window the same way again.
Thanks.

Note: the only place for the hotkeys to be in the raid window right now is to the right of the cures.. which makes the raid window a 1/4 wider then it is when the hotkeys are 'over' the health/power bars.

Darwa

I found out that it only occurred when toon A was the first one loaded up, and not if toons B, C, D etc were first. I decided to reload the spells for toon A using the utility, saved, then loaded up the game and the problem is now fixed.

Not an easy one to figure out, but at least it's working as intended now.

Darqwood

Darwa, the group window did not change from the previous version aside from cleaning up the level display for mentored characters. Open the utility and tab through your characters to make sure the spells look right. You might also try saving the group window again from the utility. If characters are still not switching for you, zip and send your group window to darqwood at hotmail dot com (don't post it here), and I'll see if I can figure out what's up.


.

Darwa

After updating, if I /camp to toon B, then the group macro skills from toon A are still present. However, the correct skills are displayed if I exit the game then log back in.

FieryArcher

Thank you very much Darqwood, I will try to install as many as possile the DarqUI's. Your great work is very much appreciated !!!

Darqwood

To use a subset of DarqUI, delete the unwanted XML files from your custom UI folder. The filenames are shown on the Updates tab of the utility when you check for updates. Click the yellow folder icon on the Settings tab to open the folder location in Windows, and then delete the unwanted files. Finally, check the "Skip" column on the Updates tab, which will ignore those files when you get updates in the future. The DarqUI Window Utility itself will not slow down your game, since it does not need to be running while you are playing.

If EQ2MAP is your default custom UI folder, you can tell DarqUI to put its files into that folder (Settings tab on the utility). Or if DarqUI is your default custom folder, you can point EQ2MAP to that folder on the Options window of the EQ2MAP Updater. Both ways work equally well.


.

FieryArcher

The UI's are fantastic, yet I am afraid that it might slow down the performance of my humble computer.

Just wonder if I could use only those UI's I need, such as the One-Button Mercenary/Warder/Pet Pulls, Tradeskills windows etc.

If it is possible, how could I do it.

EDIT: FYI, I am using the EQ2MAP Manual Version 03-23-2013, no auto update via the net. Is that DarqUI defaults to auto update?

Thanks alot.

triz989

thank you

Darqwood

triz989, you can change the Persona window defaults for all characters that are not set up by name. Open the Persona window in Notepad and find the line that begins:

Change S to "false" to turn off the stats sidebar by default. You can set the categories (G, A, D, O, M, P, T and I) to be open (true) or closed (false) by default in the same way. The categories are General, Attributes, Defense, Offense, Melee (Autoattack), PvP, Tradeskills and Misc.


The Experience bar is the same way -- there is a default character (Char0) near the top of the file that holds the stat pages for any character that is not set up. Look for:

and change the defaults to whatever pages you prefer. L1 and R1 are left and right sides for the Adventure XP bar, L2/R2 are Tradeskills, L3/R3 are the AA bar, L4/R4 are the PvP bar, and L5/R5 are the Guild bar.


.

triz989

is there a way i can add more then just 8 toons to the Persona window in your Utility window? or how can i set up so all toons have the same settings in the persona options that i have on one toon and in the Experience stat settings. i dont like having my "left window always opening with command bar you have it listed in the main page i just don't understand it

Thank you